Payment & Shipping Terms:
|Place Of Origin::||Ningbo, China||Output Type::||AC Three Phase|
Comap Controller Diesel Power Generator , 62.5kva 50kw cummins generator
Our diesel Generator power range 20KVA to 2250KVA Powered by Cummins Engine,With original Stamford / Leroy Somer / Marathon Alternator,With CHINT/ABB/Schneider ,Electric Start with Battery Base Integrated Fuel Tank, ATS, Deepsea/ComAp/Smartgen Controller
Diesel generator set data sheet:
● 40℃ radiator as standard, 50℃ is optional
● Coupled with Cummins diesel engine and Stamford
● 24V DC start motor and storage battery
● Brushless, Self-excited, IP23, insulation class H
● All generator sets are gone through rigorous testing before being released to the market place, including 50% load, 75% load, 100% load , 110% load and all protection function.
Genset Main Technical Data
3-PH, 50Hz@1500RPM, 400/230V (Also Can Be Made According To Customers’Special Requirements)
|Technical Specification of Generator set|
|Standby Output Power:||55kw|
|Prime Output Power:||50kw|
|Rating Conditions:||In accordance with ISO-3046 reference conditions:|
|Governor regulation class||ISO8528 G3|
|Voltage regulation (no load to full load)||± 1%|
|Steady-state voltage variation||± 1%|
|Frequency regulation (no load to full load)||Isochronous(0%)|
|Steady-state frequency variation||±0.25%|
|EMC compatibility||BS EN 61000-6-4 / BS EN 61000-6-2|
|Governor Type:||Electrical type|
|Technical Specification of Engine|
|Standby power||100KW @ 1500 RPM|
|Prime power||90KW @ 1500 RPM|
|Configuration||Cast iron, in-line, 6-cylinder|
|Compression ratio||17.5 : 1|
|Aspiration||Turbocharged and Aftercooled|
|Fuel system||Direct injection|
|Bore* stroke, mm||102*120MM|
|Rated speed, rpm||1500|
|Starting voltage||24V, negative ground|
|Technical Specification of Alternator|
|Main Alternator Model||Stamford UCI224F|
|Configuration of Main Alternator||Brushless,PMG,Single bearing,Air cooling|
|Frequency & Speed||50HZ/1500RPM|
|Voltage Adjust range||≥5%|
|Voltage Regulation NL-FL||≤±0.5%|
Overall size (A*B*C): 2260*1050*1560MM
Our advantages :
1) Each engine shall be tested at manufacturer’s workshop to certify the engine output according to present standard and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
2) All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
3) All accompanied documents are corresponding to the actual situation of generators, including the Qualified Certificate, Parameters and the Performance Index.
1) Guarantee Period: One year or 1000 running hours whichever comes first.
2) Engineer overseas service available.
3) Millions usd in warehouse to assure quick response for after service
4) 24 hours service hotline is available for customers.