Payment & Shipping Terms:
|Output Type::||AC Three Phase||Speed::||1500rpm|
|Rated Voltage::||400/230V||Genset Type::||Open Type|
100kva 80kw Water Cooling Electric Generator With Automatic Alarm Systoms
Data sheet of C100D5:
|Diesel generator Specification|
|PROJECT:||73kw diesel generating set power generation C100D5|
|Diesel generator Technical Specification|
|Generator Set Model:||C100D5|
|Standby Output Power:||80kw|
|Prime Output Power:||73kw|
|Rating Conditions:||In accordance with ISO-3046 reference conditions:|
|Governor regulation class||ISO8528 G3|
|Voltage regulation (no load to full load)||± 1%|
|Steady-state voltage variation||± 1%|
|Frequency regulation (no load to full load)||Isochronous(0%)|
|Steady-state frequency variation||±0.25%|
|EMC compatibility||BS EN 61000-6-4 / BS EN 61000-6-2|
|Governor Type:||Electrical type|
|Technical Specification of Engine|
|Configuration||Cast iron, in-line, 6-cylinder|
|Aspiration||Turbocharged and water-to-air aftercooled|
|Fuel system||Direct injection|
|Bore* stroke, mm||102*120|
|Rated speed, rpm||1500|
|Starting voltage||24V, negative ground|
|Battery charging alternator||24V,40A|
|Technical Specification of Alternator|
|Main Alternator Model||Stamford UCI274C|
|Configuration of Main Alternator||Brushless,PMG,Single bearing,Air cooling|
|Frequency & Speed||50HZ/1500RPM|
|Voltage Adjust range||≥5%|
|Voltage Regulation NL-FL||≤±0.5%|
|Technical Specification of Control panel|
|Control Brand||PCC 1302|
|Control system description
The PowerCommand® control system is a microprocessor-based generator set monitoring,
metering and control system designed to meet the demands of today’s engine driven generator sets. The
integration of all control functions into a single control system provides enhanced reliability and performance
compared to conventional generator set control systems. These control systems have been designed
and tested to meet the harsh environment in which gensets are typically applied.
|• 128 x 64 pixels graphic LED backlight LCD.|
|• Digital voltage regulation. Single phase full wave SCR type regulator compatible with either shunt or PMG systems.|
|• Digital engine speed governing (where applicable).|
|• Generator set monitoring and protection.|
|• Advanced overcurrent protection.|
|• Modbus® interface for interconnecting to customer
|• 12 and 24 VDC battery operation.|
|• Warranty and service. Backed by a comprehensive warranty and worldwide distributor service network.|
|• Certification. Suitable for use on generator sets that are designed, manufactured, tested and certified to
relevant UL, NFPA, ISO, IEC Mil Std., CE and CSA standards.
1. Cummins original power generator, High quality and reliable;
2. Cummins International Warranty Service;
3. Cummins PowerCommand control systom designed based on microprocessor with voltage regulation, engine protection, AC generator protection etc.
Inspection and Test:
Each engine shall be tested at manufacturer’s workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.
All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.
The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchaser’s satisfaction and tests shall be repeated.
Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.
The engine and generator shall be tested individually in accordance with relevant standards specified above.
The completed and individually tested engine and generator shall be assembled onto the base plate with all auxiliaries, instruments and controls for a complete test of the generator set.
Our company founded in 1990, is an authorized dealer of Cummins ®. Our company is gold medal flagship store of Cummins in eastern China.