Payment & Shipping Terms:
|Rated Voltage::||400/230V||Genset Type::||Open Type|
|Output Type:||AC Three Phase||Controller:||Cummins Powercommand PCC Serise|
1. Cummins original power generator, High quality and reliable;
2. Cummins International Warranty Service;
3. Cummins PowerCommand control systom designed based on microprocessor with voltage regulation, engine protection, AC generator protection etc.
Packaging & Delivery:
Packing: Plastic film package as stardard, or according to customer requirements.
Delivery time: Normally 20 working days, depends on quantity.
1 year or 1000hours whichever who comes first.
Cummins has more than 680 company owned/joint venture/independent distributor locations in 137 countries and territories and provides service through a vast dealer network of more than 5000 in 197 countries and territories. Cummins worldwide service network may provide warranty service support to all exported products (including the engines installed in OEM equipment) of Chongqing Cummins. It includes, but is not limited to, customer technical support and training, service parts distribution, troubleshooting and responsibility judgment within warranty coverage, warranty service etc.
Data sheet of C550D5:
|Diesel generator Specification|
|PROJECT:||400kw diesel generating set power generation C550D5|
|Diesel generator Technical Specification|
|Generator Set Model:||C550D5|
|Standby Output Power:||440kw|
|Prime Output Power:||400kw|
|Rating Conditions:||In accordance with ISO-3046 reference conditions:|
|Governor regulation class||ISO8528 G3|
|Voltage regulation (no load to full load)||± 1%|
|Steady-state voltage variation||± 1%|
|Frequency regulation (no load to full load)||Isochronous(0%)|
|Steady-state frequency variation||±0.25%|
|EMC compatibility||BS EN 61000-6-4 / BS EN 61000-6-2|
|Governor Type:||Electrical type|
|Technical Specification of Engine|
|Configuration||Cast iron, in-line, 6-cylinder|
|Aspiration||Turbocharged and air-to-air aftercooled aftercooled|
|Fuel system||Direct injection|
|Bore* stroke, mm||137*169|
|Rated speed, rpm||1500|
|Starting voltage||24V, negative ground|
|Battery charging alternator||24V,35A|
|Technical Specification of Alternator|
|Main Alternator Model||Stamford HCI544D|
|Configuration of Main Alternator||Brushless,PMG,Single bearing,Air cooling|
|Frequency & Speed||50HZ/1500RPM|
|Voltage Adjust range||≥5%|
|Voltage Regulation NL-FL||≤±0.5%|
|Technical Specification of Control panel|
|Control Brand||PCC 2100|
|Control system description
The PowerCommand® control system is a microprocessor-based generator set monitoring,
metering and control system designed to meet the demands of today’s engine driven generator sets. The
integration of all control functions into a single control system provides enhanced reliability and performance
compared to conventional generator set control systems. These control systems have been designed
and tested to meet the harsh environment in which gensets are typically applied.
|• 128 x 64 pixels graphic LED backlight LCD.|
|• Digital voltage regulation. Single phase full wave SCR type regulator compatible with either shunt or PMG systems.|
|• Digital engine speed governing (where applicable).|
|• Generator set monitoring and protection.|
|• Advanced overcurrent protection.|
|• Modbus® interface for interconnecting to customer
|• 12 and 24 VDC battery operation.|
|• Warranty and service. Backed by a comprehensive warranty and worldwide distributor service network.|
|• Certification. Suitable for use on generator sets that are designed, manufactured, tested and certified to
relevant UL, NFPA, ISO, IEC Mil Std., CE and CSA standards.